Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 9
41
General Discussion / Magothy Rendezvous July 16, 2016
« Last post by Ed Criscuolo on July 01, 2016, 09:45:51 am »
Just a reminder that the July 16 Rendezvous on the Magothy River is rapidly approaching.  Details are posted on the Upcoming Events page of the website:
http://cbpsa.org/upcoming.php

Please RSVP with the number coming before July 8.
42
P-323 / Re: Step for Pearson 323
« Last post by Ed Criscuolo on July 01, 2016, 09:40:07 am »
Sorry you can't make it.  But I'm sure we'll eventually meet up sometime.

Since your 323 is a 1978, I'm assuming you have an Atomic 4 engine.  Ours 1977 does, and I'm quite happy with this dependable, simple, easily serviced little engine. You should look up the Moyer marine forum (http://moyermarine.com/forum).  It contains a lot of very high-quality info on the A4, as well as a lot of active and knowledgable members who are happy to help.

You should definitely look up the Pearson-323 Owners website and forum: http://www.pearson323.com/ .  Lots of 323 Owners there.  And they maintain a registry of as many of the 323s as they can find.  I noticed that hull #98 is not listed in the registry, so you should at least pop by there and send the webmaster an email with your information.

Are you having any specific electrical issues?  I'm pretty familiar with the boat's electrical system.  The original wiring is pretty sad, and ours has been further complicated by EIGHT previous owners before us!  Little by little, I've been going through and correcting the problems.
43
P-323 / Re: Step for Pearson 323
« Last post by Wayne See on July 01, 2016, 07:30:34 am »
Ed thank you for the information you provided on the step plate. I will look into routing the sink and shower water to the bilge.  I am going through the systems on the boat to see what I need to modify. The information other owners of older boats provide  is very useful. Thank you for your reply. By the way, I am having an electrician look at the electrical system as i believe it is the original wiring.

I don't think we can make the rendezvous due to previous commitments. Thanks again
44
P-323 / Re: Step for Pearson 323
« Last post by Ed Criscuolo on June 30, 2016, 05:05:01 pm »
Hi Wayne,

Welcome to the PSA and welcome to the forum.

We too have a p-323 which also had mast step issues when we bought it. The OEM Pearson step was fabricated from mild steel which had rusted severly in the damp bilge. Even worse, galvanic corrosion between the steel and the aluminum mast had eaten into the mast enough to be of concern. This is a known problem with some Pearsons.

A few years ago, I took down the mast and completely rebuilt it, sandblasting it down to a bare pole and doing new paint, fittings, wiring, lights, and rigging. In the process of this, we had to cut off 4" from the foot of the mast and have a new step fabricated. I went with welded 1/2" aluminum plate on the theory that it would produce no galvanic corrosion with the alum. mast. Probably overkill, as the original steel step and mast lasted over 30 years!

As for the bilge, the shower and sink should NOT drain into it!  I suspect a previous owner modified it. Ours has a small sump tank located under the large floor hatch in the main cabin. The shower, small sink, and the icebox drain into it. A manually activated electric pump empties it.

If you come to the July rendezvous we can compare notes. Looking forward to meeting you.
45
P-323 / Step for Pearson 323
« Last post by Wayne See on June 30, 2016, 04:31:22 am »
I recently purchased my Pearson 323 hull 98. The step plate was almost totally corroded away. I had a stainless steel step fabricated and had to cut 4 inches off the mast as the bottom was corroded. The step was built up 4" to compensate.  I was wondering if anyone else had a similar problem? I am thinking of putting in a small bilge pump at the base of the mast to move standing water away from the step plate. The sink and shower drain into this compartment. Any thoughts would be appreciated.
46
General Discussion / Re: High Winds After Dun Cove Raftup
« Last post by Bob Morrow on June 22, 2016, 12:09:42 am »
I had a similar exciting return to my home marina from the
Dun Cove race & raft up on Sunday June 12,2016. I also went through
the Knapp's Narrows channel despite my misgivings due to the horror
stories I had read about severe shoaling. I felt better about it though,
since Jordan Snyder on "Base Camp" had gone through in the opposite
direction the day before and said he had no problems. Just make sure,
if you try it, going west from the bridge, that you hug the greens (but don't go
on the starboard side of them, even though at least one chart shows the channel
gong on the starboard side of the G-3) and don't go ANYWHERE NEAR the reds.
They have helpfully deployed several white spar bouys to show where the deepest
water is, so if you go between them and the greens, you should be ok, at least with
a draft of 4' 8" or less.

Coming out of the channel, the winds weren't in an ideal direction, but my boat points
pretty well, so I put up full main and jib and sailed as close to the rhumb line to the
Bay Bridge as I could. The winds kept building, so I dedcided to partially furl
the jib and put a reef in the main.  We got a little beat up by the strong winds on Sunday. I was enjoying the excitement of sailing with one reef, something I rarely do with my stiff sailing boat, and then two reefs, almost never on my boat, but my crew had never sailed in conditions like that, and it wasn't long before he lost his breakfast over the side. Then somehow the sliding car pounded the stopper off the end of the track for my self-tending jib, and the car followed, scattering ball bearings all over the deck. Not being able to use the jib, I motor sailed with two reefs in the main. My crew was ready to soldier through his discomfort so we could get home, but then as we were motoring towards the Bay Bridge, we were stopped by the USCG Aux. telling us that we would have to wait for at least an hour for the Bay Swim (which I somehow hadn't realized was being held that day) to be over. I knew my crew wouldn't be comfortable circling for an hour in those conditions, so I detoured to Cantler's Riverside Inn, where we got ice tea to help with dehydration (not a good time for any type of alcohol) and snacks. By then my crew was feeling better, but not looking forward to going back to bash against the waves, and he had to be at work early Monday morning, so he called and got an Uber car ride to my marina, to pick up his car. I asked Cantler's for permission to hang on their dock overnight and started home the next morning, still with strong winds, but not a gale."
Bob
47
General Discussion / High Winds After Dun Cove Raftup
« Last post by Ed Criscuolo on June 21, 2016, 08:09:13 pm »
On June 12, the Sunday after the race, we sailed back to the Patapsco from Dun Cove on Harris Creek, behind Tilghman Island.  The winds started out light but eventually built quite high.  The NWS even issued a Gale Warning.

We left our PSA Raftup about 9:30 Sun morning and motored through Knapps Narrows without incident. Winds on the Bay were light but unfavorable, but quickly build to 20-25 from the NW, slowing our progress to a crawl. We unfurled about half our jib only, to approximate a storm jib.  This steadied the boat,  and we were able to motor sail due North at 6 - 7 knots as the winds built to over 30. Great fun!

Just before the Bay Bridge, we took a huge gust in excess of 40 that came close to a knockdown. Listening to the VHF, we were astounded to learn that the annual Bay Bridge swim was in progress!  The bridge span had just reopened to boat traffic as we arrived, so we motor-sailed through.

But past the Bay Bridge, our course lay NNW, too close to the wind to sail. We didn't want to continue sailing North and end up on the eastern shore because we would then have to pound back through the chop that would have had 15 miles of fetch to build. So we furled our jib, hugged the western shore for shelter and called on our trusty Atomic-4 engine to get us through.

The next hours were quite unpleasant (we don't have a dodger). The winds stayed at 30 with gusts much higher. We continued hugging the shore, but crossing the mouth of the Magothy lost this protection and pushed our engine close to its limits, hobby-horsing over the 3 ft rollers coming out of the river. It seemed to take forever to cross. The GPS often showed our speed-over-ground briefly slowing to 0! The A4 kept grinding on at 2800 RPM (800 above our normal cruise) for hours with no issues.

The shoreline from Gibson island up to Bodkin Point gave us good shelter, but once around Bodkin, the final slog up the Patapsco was also long and unpleasant, with a long fetch and the wind dead on the nose.

As we entered Rock Creek, sheltered from the chop, we shook our heads in disbelief at a 15ft skiff, overloaded with 7 or 8 bathing-suited teenagers, all standing up(!), headed out of the Creek!  We kept an eye on them, sure that we were going to have to go back and rescue them, but they stopped at the mouth of the Creek as their self-preservation instincts finally kicked in!

We were finally tied up at our marina by 5:30, beat but happy after our 8 hour workout.  Nothing broke, and nobody got hurt or sick!

48
General Discussion / Re: Dunn Cove Raft!
« Last post by Ed Criscuolo on June 09, 2016, 04:18:17 pm »
There are no rules ;)
Typically people float from boat to boat, but often end up congregating in the cockpit of the largest boat.
Bring a swimsuit and a towel for pre cocktail hour. The weather forcast looks perfect!

We're planning on going down to the West River tomorrow (Friday) and tying up at the Pirate's Cove in Galesville if they have room.  Otherwise, we'll anchor out.

I believe Bob Morrow is anchoring out up on the Rhode River Friday.
49
General Discussion / Dunn Cove Raft!
« Last post by Jonathan Ballou on June 08, 2016, 10:12:29 pm »
First time for this kind of thing for us.  How does this work with food sharing?  We don't have a common table, so.....
50
Website Admin / 2016 Photos Uploaded
« Last post by Ed Criscuolo on May 30, 2016, 09:44:45 pm »
The photos from the 2016 PSA Annual Meeting and the 2016 Sock Burn have been uploaded to the Website's Photo Gallery at http://cbpsa.org/gallery

Also, thanks to Gary Budesheim for some archival photos from the 2006 Wye River Crabfeast.
Pages: 1 ... 3 4 [5] 6 7 ... 9